Ventilation pipes are suitable for transportation in all walks of life. Factory buildings and air conditioners are used. This skill is also used in shipbuilding industry. It is relatively early for this skill to move to the shipbuilding industry. The following ventilation duct processing tells you its application in shipbuilding industry.

通風管道加工

Ventilation pipe processing

薄鋼板法蘭通風管道內、外表層和內部絕熱材料粘接牢固，是確保復合材料的基本條件之一。超出面積的板材缺陷，不只影響風管運用壽命，并且有時會下降其保溫效果。所以缺陷不得大于6‰，以到達材料在體系中的正常運用。潔凈空調體系的風管采用鍍鋅鋼板加工。

It is one of the basic conditions to ensure the composite material that the inner and outer layers of the thin steel flange ventilation duct are firmly bonded with the internal insulation materials. The board defects beyond the area not only affect the service life of the air duct, but also reduce the insulation effect sometimes. Therefore, the defect should not be greater than 6 ‰, so as to reach the normal use of materials in the system. The air duct of clean air conditioning system is made of galvanized steel plate.

吊架，加固框，連接件均采用鍍鋅件;法蘭墊料應用有彈性、不產塵，有強度的軟橡膠或者乳膠海綿;風管的外保溫采用難燃橡塑板，以專用膠張貼，禁止在施工過程中運用玻璃棉等纖維制品。多個排煙分區合用排煙排風體系，這種狀況的話，就是電動閥+排煙風口，平時常開排風，著火封閉非著火點排煙分區的設置在支管上的電動閥。

The hanger, reinforcement frame and connecting parts are galvanized parts; the flange cushion material shall be flexible, dust-free, and strong soft rubber or latex sponge; the external insulation of air duct shall be made of flame-retardant rubber plastic plate and pasted with special glue, and fiber products such as glass wool are prohibited in the construction process. Multiple smoke exhaust zones share the smoke exhaust system. In this case, it is the electric valve + smoke exhaust outlet, which is normally open for exhaust and closed on fire. The electric valve is set on the branch pipe of smoke exhaust partition without ignition point.

Ventilation pipe processing

對于民用建筑，通風管道在設計階段，各工種(暖通、給水排水，供電照明)應洽談好空間分隔，定出每種管道的標高規模。一般狀況下不得越出給自己規定的界限。遇有單個管段要越界時應與其他工程洽談。在通風體系中的風管是相互連接的一個整體，必然得遵從各支路阻力平衡規則，當風管體系的結構方式、管道尺度一經確認，在風機作用下，各段的風量是按阻力平衡規則自動分配的。

For civil buildings, in the design stage of ventilation pipes, all types of work (HVAC, water supply and drainage, power supply and lighting) should first discuss the space separation and determine the elevation scale of each kind of pipeline. In general, they should not go beyond the limits set by themselves. When a single pipe section needs to cross the boundary, it shall be discussed with other projects. In the ventilation system, the air duct is a whole connected with each other, and it must obey the resistance balance rules of each branch. Once the structural mode and pipe scale of the air duct system are confirmed, the air volume of each section is automatically distributed according to the resistance balance rule under the action of the fan.

通風管道加工

Ventilation pipe processing

以上就是關于通風管道在造船工業中的應用相關介紹，希望對您的生活提供有效幫助，感謝您的閱讀與支持。

The above is about the application of ventilation duct in shipbuilding industry, hope to provide effective help to your life, thank you for your reading and support.